Use
stainless steel, polyethylene or fiberglass tanks.
Protect from freezing.
In case of spills or bodily contact, flush with
water.
Avoid inhalation of fumes. Product is slippery.
For further information, please consult the Material
Safety Data Sheet. |
Optimum
dosages are determined by on site laboratory tests
but as a general guide the following dosages are
recommended:
Primary coagulant 0.2 to 3.0 ppm
Filter Aid 0.1 to 0.5 ppm
In-Line Clarification 0.2 to 5.0 ppm
Clarification/Thickening 1.0 to 10.0 ppm
Initial dilution with water to 10.0% or less is
recommended, followed by further dilution to 0.2%
before application. The product may be fed neat with
in-line dilution where necessary, consistent with
good mixing. |
