DustREADY-110

DustREADY-110 is a natural by-product from trees made primarily of Lignin, the natural polymer that binds tree fibers together.

 

This product is approved for dust control in the state of West Virginia.

 

   Before                                          After

 08_-_Z_110_-_Wind_Farm_06_-_Flat_Top_Rd_17_Days_Later_-_West_End_Untreated_-_Car_Covered_in_Dust_1.jpg   09_-_Z_110_-_Wind_Farm_07_-_Flat_Top_Rd_17_Days_Later_-_West_End_Treated_-_Car_in_Distance_2.jpg

 

 

 

DustReady110.png

Intended Use:

 

DustREADY-110 is applied every year to roadways and commercial yards to stabilize and improve the quality of road surfaces and control dust. Its natural binding qualities minimize any product leaching in the soils. DustREADY-110 is non-corrosive and will not attack metals or promote rusting beyond the rate of water. DustREADY-110 is applied as a liquid and dries to a hard durable surface that controls dust and increases loadbearing capacity. Studies have found that “lignosulfonates out performed all other products in terms of aggregate retention,” resulting in lower grading and gravel replacement cost. DustREADY-110 provides you with an opportunity to reduce your salt use when applying dust control chemicals by using an organic, safe, non-chloride alternative. As a binder, DustREADY-110 reduces gravel loss and grading requirements, which lowers overall road maintenance costs.

 
Dosage and Application:

Dosages and application are a function of the quantity and type of dust particles to be treated. Through onsite evaluations, proper rates can be established that will allow contact with all the various size particles. Please contact a Zinkan representative for further information.